time:2021-01-12 browse:second
LT10SR-2416/LT10SR-2416K/LT10SR-2416RK submersible liquid level transmitter uses a high-performance diffused silicon piezoresistive pressure sensor as the measuring element, the hydrostatic pressure, which is proportional to the liquid depth, is accurately measured and converted into a standard (current or voltage) signal output by the signal processing circuit. The linear correspondence between the output signal and the liquid depth is established to realize the liquid level measurement. The product has high precision and compact size, it can be directly put into the liquid to measure the height of the liquid from the end of the transmitter to the liquid surface, which is convenient to use. It's suitable for liquid level measurement and control in the fields of petroleum, chemical industry, power plants, urban water supply, hydrology, etc.
● Separate structure, Fully sealed stainless steel structure (sensor housing), Cast aluminum structure(electronic housing);
● LT10SR-2416K has stainless steel pipe armoured protection, flange installation, on-site display and adjustment;
● LT10SR-2416RK is full welded, stainless steel flexible tube armoured;
● Explosion-proof type product conforms to Exia II CT6 Ga of GB3836.4 standard, Explosion-proof certificate is issued;
● Marine product conforms to CCS 'Classification Rules of Steel Sea-going Vessel' (2006), Obtained the marine product type approval certificate;
● CE Certificate
Range | LT10SR-2416 | 1 2 5 10 20 50 100 200mH₂O | ||
LT10SR-2416K | 1 2 3 4mH₂O | |||
LT10SR-2416RK | 1 2 5 10 20mH₂O | |||
Overpressure | 1.5 times FS | |||
Accuracy | ±0.25%FS(typ.) ±0.5%FS(max.) | |||
Stability error | ±0.1%FS(typ.) ±0.2%FS(max.) range>10mH₂O | |||
±10mmH₂O(typ.) ±20mmH₂O(max.) range≤10mH₂O | ||||
±20mmH₂O(typ.) ±30mmH₂O(max.) LT10SR-2416RK | ||||
Temp.error | Range | Zero error, ±%FS/℃ | Sensitivity error, ±%FS/℃ | |
>10mH₂O | 0.005(typ.) | 0.01(max.) | 0.02(max.) | |
≤10mH₂O | 0.01(typ.) | 0.02(max.) | 0.02(max.) | |
≤5mH₂O | 0.015(typ.) | 0.03(max.) | 0.02(max.) | |
≤2mH₂O | 0.025(typ.) | 0.05(max.) | 0.02(max.) | |
Transmitting | 2-wire | 3-wire | 3-wire | |
Power Supply | 15~28V DC(Intrinsic safety type is supplied through safe barrier) | |||
Output Signal | 4mA~20mA DC | 0mA~10/20mA DC | 0/1V~5/10V DC | |
Load(Ω) | < (U-15)/0.02A | < (U-15)/0.02A | >5k | |
Material contacting with media | LT10SR-2416 | Housing: Stainless steel 1Cr18Ni9Ti | O-ring: Fluororubber | |
Diaphragm: Stainless steel 316L | Rubber sleeve: NBR | |||
Cable: Φ7.2mm PE(or PU) | ||||
LT10SR-2416K | Stainless steel, red copper, Fluororubber O-ring | |||
LT10SR-2416RK | Stainless steel 1Cr18Ni9Ti | |||
Operation Temp. | -30℃~80℃ -10℃~70℃(LT10SR-2416) -10℃~60℃(intrinsic safety type) | |||
Storage Temp. | -40℃~120℃ -20℃~85℃(LT10SR-2416) | |||
Protection | IP68(Sensor housing); IP65(Junction box) | |||
Ex-proof grade | ExiaⅡCT6 |
Unit: mm
LT10SR-2416
LT10SR-2416K
LT10SR-2416RK
Order Guide | ||||||
LT10SR-2416 | Submersible Liquid Level Transmitter | |||||
LT10SR-2416K | Armoured Liquid Level Transmitter | |||||
LT10SR-2416RK | Flexible Armoured Liquid Level Transmitter | |||||
Range [0m~XmH₂O]L | L: cable length, L-X=(1~2)m suggested | LT10SR-2416 | ||||
L: armoured tube length | LT10SR-2416K | |||||
L: flexible armoured tube length | LT10SR-2416RK | |||||
Code | Output Signal | |||||
E | 4mA~20mA DC | |||||
F | 1V~5V DC | |||||
J | 0V~5V DC | |||||
Q | 0mA~10mA DC | |||||
U | 0mA~20mA DC | |||||
V | 0V~10V DC | |||||
Code | Construction material | |||||
Diaphragm | Port | Housing | ||||
22 | SS 316L | SS | SS | |||
24 | SS 316L | SS 316L | SS 316L | |||
25 | Tantalum | SS | SS | |||
Code | Additional Function | |||||
M1 | 0~100% linear indicator(LT10SR-2416 does not include this option) | Only for 4mA~20mA DC | ||||
M3 | 3½ LCD display | |||||
M6 | 4 LED display | |||||
i | ExiaⅡCT6 Ga | |||||
C1 | M20×1.5 male,face type seal | LT10SR-2416 | ||||
C3 | G1/2 male | |||||
C5 | M20×1.5 male, waterline seal | |||||
T | Marine type | |||||
F1 | Fixed flange | |||||
1F1 | Stainless steel flange 1 DN50 | LT10SR-2416K | ||||
1M1 | Stainless steel male M42×1.5 | |||||
1F2 | Stainless steel flange 2 DN10 | |||||
1M2 | Stainless steel male M30×1.5 | |||||
2F1 | Carbon steel galvanized flange 1 DN50 | |||||
2M1 | Carbon steel galvanized male M42×1.5 | |||||
2F2 | Carbon steel galvanized flange 2 DN10 | |||||
LT10SR-2416 | [0~3mH₂O]5 | E | 22 | M1C1 | the whole spec. |
LT10SR-2416/LT10SR-2416K/LT10SR-2416RK liquid level transmitter has high precision and compact size, It's suitable for liquid level measurement and control in the fields of petroleum, chemical industry, power plants, urban water supply, hydrology, etc.